How Can You Polish Your Engineered Wood Floor?
Having a wooden floor can be one of the most wonderful flooring types in your house. Among all the wood floorings, the engineered wood floors are the most demanded. They have very high durability and can last for several decades. Although the engineered wood floors may indeed fulfill their purpose, it is possible that they start losing their polish and shine right after a few days of being installed.

How to Keep the Engineered Wood Floors Shiny?
Therefore, you are required to polish the engineered wood floors, which would keep them shiny. If you want to learn, will show you how to polish engineered wood floors – you should know these easy steps to shine the floor if you have one installed.

Purchase a Polish that is Good Quality
The first rule of polishing the engineered wood floor is to never buy a polish that is bad quality or cheap. Go for the one that is known for being the first pick of people in your area. Ask professionals if you have to and they may be able to point you in the right direction.

It is highly recommended that the polish must be urethane, which means it should be water-based. After the polish is applied, polyurethane is highly recommended for finishing purposes. You can also use wax-based polish if you want to end the polishing process with different finishing.

You will need to wipe the entire floor with a microfiber cloth once you have put the solution onto the engineered floor. Remember, the cleaning process has to be completed either using a mop or just by hand.

Never Ignore Instructions
It is highly recommended that you must always go through the manual or the instructions that are given on the polish. From there, you can learn exactly what quantity of polish you need to cover a certain area. Sometimes, the instructions may ask you to make sure that the engineered wood floor is waxed and sanded. If the instructions do prescribe using wax and sand, then it is better to do it.

Don’t Be Too Hasty
If it is your first time polishing the engineered wood surface, then it is highly advised you test it out first on a small area on your wooden floor. Try applying the polish on a particular area of the wooden floor and see what the outcome is. If the result is the same as you desired, then you can proceed with going all out on the floor.

Go for the Polishing
Once you are done with the above, it is time to proceed with the polishing process. You can first decide the direction whether you would begin from the interior flooring and go to the exterior, or the other way around. Either directly spray the polish on the engineered wood floor or apply it on the microfiber cloth, and then wipe it on the floor. You can go for the famous feathering technique when polishing the floor, which means doing it in a semi-circle method.

Polish with Calculation
Do not apply polish on the entire floor at once and try doing it square by square. Try covering 3 feet by 3 feet or 4 feet by 4 feet to polish the floor. If the polishing process has involved waxing, then you have to increase the polishing layers to 2 or 3. Give it 3 days if you have three polish layers to apply, each going for 24 hours.

Let the Polish Dry Completely
The drying process for the polish can actually test your patience. But it is needed for best polishing results. It is very important you let the polish dry for an entire day if it is a single layer and the days multiply with each layer. Bring the furniture once the polish is all dried up and your floor is shining. To check whether the polish is dry or wet, wear socks to walk on the floor once the required time is up. Make sure no one ends up walking on the wet polish to ruin it completely.

Seek Professional Help
As you can see that the process is time-taking and is very sensitive, it is very important that it works flawlessly. Therefore, it is very that instead of polishing the floor on your own, you call for a professional. You can contact Tycan Flooring at 416 371 3948 and consult your flooring problems or new floor installation with them.

They have very skilled and experienced workers who can perform any kind of floorings such as laminate flooring, vinyl flooring, carpet flooring, tile flooring, and Engineered wood flooring Vaughan, Markham, and all major cities in GTA are covered by Tycan Flooring.

They have been providing their services for more than 20 years, provide free measuring, quick quotes, use of quality material, and provide easy scheduling for installation works.

You will get the included organizations from the gathering if you put in the solicitation as wooden furniture by this platform. Not to devour the unwanted ones' time, they are solid and trust able, so get the things.

Thanks for sharing such an informative thread. Although the concept of engineered wood floors is a little new for many households but its benefits are remarkable. First of all, if we compare the pricing, these wood floors are economical compared to hardwood floors. Probably, many users debate over its durability over hardwood flooring options, but I think a 30-year life span with an affordable price is still a good choice.

On the other hand, if we talk about cleaning, it is also easy than hardwood flooring, and wet mopping is possible. However, the maintenance of engineered wood floors sounds a little tricky compared to hardwood. Although you can sweep and vacuum them daily but I think the use of quality polishing also enhances the durability. In this regard, the utilization of high-quality tung or linseed oil would be effective. Or you can simply apply this https://priorypolishes.co.uk/product/liberon-superior-danish-oil/ oil based on top-quality tung oil. These types of polishes confer great protection against water, alcohol, and heat.

However, to keep it clean and stable for a long period of time, you should avoid applying chemicals on engineered floors. Correspondingly, don't use sandpaper and vinegar-based cleaning sprays. Best of luck!